<code id="kius6"><small id="kius6"></small></code>
<center id="kius6"><div id="kius6"></div></center>
<center id="kius6"></center><center id="kius6"><wbr id="kius6"></wbr></center>
<center id="kius6"><div id="kius6"></div></center>
<center id="kius6"><wbr id="kius6"></wbr></center>
<center id="kius6"></center>
PRODUCTS

    NB100B-NB1200B Booster Pump

      Features
      Oil-free
      Since no lubricating oil is used in the casing chamber, stable performance is realized even when evacuating water vapor or solvent vapors.

      Operation at high inlet pressure
      If a motor larger than the standard motor is installed, the pumps are sufficiently applicable to systems having high gas loads, such as CO2, laser process.

      Applications
      ?  Illuminate, electronics optics, semiconductor.
      ?  Evaporation, sputtering, ion plating, liquid crystal injector.
      ?  Vacuum drying, freeze drying, vacuum degassing.
      ?  Vacuum heat treatment furnaces, sintering furnaces, brazing furnaces.
      ?  Analytical instrument, leak testers, CO2 laser equipment vacuum dryers.
Specifications
Dimensions
Pumping rate curve
    Download


* 1  This value is measured by the Pirani vacuum gauge. It is approx. 4.0×10-2 Pa (NB1200B is 6.7×10-2 Pa) when a McLeod vacuum gauge is used.
* 2  This value changes depending on the performance of the fore pump. The above data is obtained when the pump is used in combination with a standard fore-pump.
* 3  Air cooling will do when the pressure is lower than 530 Pa. Water cooling is required in continuous operation at a pressure higher than 530 Pa.
* 4  The temperature of inlet port cooling water must between 5~30℃.The pump is prohibited to be used in dewy environment or low temperature environment of  the cooling water.

    NB2400B Booster Pump

      Features
      Oil-free
      Since no lubricating oil is used in the casing chamber, stable performance is realized even when evacuating water vapor or solvent vapors.

      Special surface treatment
      ?  The surface of the main components is hard oxidized to improve corrosion resistance and reduce internal damage of the pump body.
      ?  This feature is optional and the surface of the standard is not processed.

      Configure the inverter to shorten the exhaust time
      ?  After the inverter is configured, it is started simultaneously with the rough pump,which effectively shortens the exhaust time compared with the standard pump.
      ?  This accessory is optional and the standard pump is not configured.

      Applications
      ?  Evaporation, sputtering, ion plating, liquid crystal injector.
      ?  Vacuum drying, freeze drying, vacuum degassing.
      ?  Analytical instrument, sealing device.
      ?  Vacuum heat treatment furnace, dissolution furnace.
      ?  Various other vacuum devices.
Specifications
Dimensions
Pumping rate curve
    Download


* 1  This value is measured by using a Pirani vacuum gauge. It is approx.6.5×10-2 Pa when a Mcleod vacuum gauge is used.
* 2  This value changes depending on the performance of the fore pump. The above data is obtained when the pump is used in combination with a standard fore pump.
* 3  The temperature of inlet port cooling water must be 5~30℃. Keep the environment that does not cause dew formation when the cooling water temperature was lower.

新乡犊试化妆品有限公司